性能特點：
※ 高效節能:采用高效韓國真空熱水鍋爐技術，鍋爐在真空狀態下運行，沸點低，汽化潛熱（凝結潛熱）換熱，有效地提高了熱效率，換熱性能好，本體三回程濕背式設計，有效的提高輻射和對流換熱面積，鍋爐的熱效率高達91%。
※ 機組負壓運行，安全可靠:機組真空運行，熱媒處于真空狀態，不存在膨脹、爆炸的危險。爐體內儲有恒量的熱媒水，沒有干燒的危險。多重自動保護裝置，具有其它鍋爐的安全性。
※ 無腐蝕、不結垢，使用壽命長:熱交換器采用不銹鋼材質，一次性注入的熱媒在封閉狀態下運行，無腐蝕、不結垢，使其使用壽命比普通鍋爐延長近二倍，長達20年之久。
※ 機型豐富，一機多用:立式、臥式、燃油、燃?xì)?、水管、煙管多種機型可供用戶自由選擇，熱交換器與集箱分離，采暖水、熱水的負荷可根據需要隨時切換，滿足用戶使用中對采暖水和清潔熱水的不同要求，確保熱水清潔穩定。
※ 體積小，安裝簡便:模塊化設計，高性能換熱組件，機組體積小，使產品易于運輸、安裝。在小空間內，多臺機組可并聯使用。
※ 與眾不同的環保功能:采用高性能燃燒器，回焰式結構設計，燃料燃燒充分，各項環保指標達到國家旅游區排放標準。
※ 免除了繁雜的報批手續:機組處于真空狀態下運行，簡化了壓力容器的報批、年審等手續，操作工無需持證。
※ 智能控制:觸摸屏顯示，虛擬按鍵、中文及圖形顯示系統工況、在線操作指南、故障自診斷、全自動運行加手動操作可一用一備；實現人機對話。
Performance Characteristics：
1. High efficiency and energy saving
Utilizing highly efficient Korean vacuum hot-water boiler technology, the boiler operates under vacuum conditions with low heating point. The steam heating (condensing for heating) effectively improves heat efficiency with good ability to exchange heat and tri-circulation design. The rear smoke path installs surplus heat recycle equipment to increase resource usage rate. The heat usage rate is as high as 91%.
2. The unit operates under pressure with safety
The unit operates in vacuum. The heat media is under vacuum condition with no danger of expansion or explosion. The boiler also stores constant heat-media water without danger to burn out. There are many self-protection installations with un-matchable safety features by other boilers.
3. No Rusting, no accumulation to prolong usage life
The heat exchange machines uses stainless steel material for the heat-media to operate under closed space. Under high temperature, there is no rusting, no furring to prolong the life of the boiler, almost twice as the normal boilers, making it almost 20 years.
4. Abundant models, various usage for one machine
There are vertical, horizontal, oil-burning, water-pipe, and gas-pipe various models for the users to choose. Heat exchange machine and collection machine are separate. Warm water and clean hot water bearing can be alternated based on needs to satisfy different needs from the customers for guarantee of the cleanness and stability of hot water.
5. Small volume, easy for installation
Module design, high quality heat exchange components, and the unit bulk is small. All these made transportation and installation easy. In a small space, many units can be used together.
6. Extraordinary Environmental friendly functions
Utilizing high functional burner with circulating flame structure design to completely burn the fuel. Various environmental indicators reach the national standards of travel zone exhaustion.
7. Elimination of complicated inspection procedures
The unit operates under vacuum conditions, eliminating the reporting for inspection for pressured vessels. There is no annual inspection needed, and no special permit is need for operation.
8. Intelligent Control
Touch-screen display, simulated buttons, with Chinese and pictured display operating conditions, online operating manual, automatic failure detection, and automatic operation and manual operation are both available. True dialogue between people and machine is possible.
工作原理(Work Principles)
真空熱水鍋爐是利用熱媒水的相變進行熱交換的，燃料燃燒釋放出的熱量被熱媒水吸收，當溫度上升至某真空度狀態下的飽和溫度時，蒸發成飽和蒸汽，完成次相變過程；飽和蒸汽容重較小，在真空室迅速上升，并在真空室與冷凝交換器進行熱交換，蒸汽被冷凝成水，釋放出凝結潛熱，完成第二次相變過程。凝結水流進蒸發室繼續吸熱，完成相變循環。
真空熱水鍋爐的下部結構由燃燒室和傳熱管束組成；上部為真空室，其中插入了U型管熱交換器；真空室外接抽氣單元，使真空室保持穩定的真空度，并將真空室內不凝結氣體抽出，提高U型熱交換器的換熱效率。
Vacuum hot water boiler uses the change of heat-media water to exchange heat. The heat created from fuel burning is absorbed by heat-media water. When the temperature rises to the saturation point under vacuum, the water evaporates to steam, completing the first phase of change. The volume of the saturation steam is quite small. It rises fast in the vacuum room and heat exchange occurs in the vacuum room with the condensing device. The steam then is condensed to form water, releasing condensed heat, completing the second change phase. The condensed water flows into evaporation room to continue to absorb heat, completing the exchange circulation.
The bottom structure of the vacuum hot water boiler is made of the firebox and heat passing pipes. The upper part of the vacuum room with U-shape pipe heat exchange device. The vacuum is connected to air-pumping unit, making a stable vacuum in the room. The air pump also pumps out the steam that does not condense, increasing the heat-exchange efficiency of the U-shape exchange devise.
會員1.png)
QQ:2568841715
