農機網>產品庫>排灌機械>閥門>球閥>>進口一片式球閥｜進口球閥超薄型對夾球閥

進口一片式球閥｜進口球閥超薄型對夾球閥

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱上海凡而閥門有限公司
品牌
型號德國托普
所在地上海市
廠商性質代理商
更新時間2025/5/14 14:29:21
訪問次數45

產品標簽:

進口一片式球閥德國一片式球閥美國一片式球閥超薄型電動球閥超薄型對夾球閥

在線詢價收藏產品點擊查看聯系電話

索取相關資料

公司介紹主營產品

上海凡而閥門有限公司是一家具有二十多年歷史的大型閥門生產企業，是全國Z主要和較大的閘閥、截止閥、球閥、蝶閥、水力控制閥等通用閥門供應商之一。在石油、化工、冶金、電力、建筑、熱力、供水等行業具有很高的度及影響力。產品一直供不應求，國內外市場。

上海凡而閥門有限公司秉著“以誠為本，互惠雙贏”的原則，服務于廣大客戶。全面實行標準化、專業化、科學的管理制度，具有健全有效的質量管理體系，并先后通過了“ISO9001質量管理體系認證”，公司始終堅持“誠品求生存，科技求發展”的經營方針，在產品品質上以“精益求精，追求*”為質量方針。

展開顯示更多內容

球閥、針型閥、截止閥、閘閥、止回閥、蝶閥、阻火器、排氣閥、排泥閥、過濾器、放料閥、隔膜閥、安全閥、旋塞閥、柱塞閥、平衡閥、調節閥、疏水閥、電磁閥、呼吸閥、管夾閥、排污閥、氣動閥門、電動閥門、高壓閥門、中壓閥門、低壓閥門、高溫閥門、高溫高壓閥門、保溫閥門、水力控制閥、真空閥門、不銹鋼閥門、襯膠閥門、襯氟閥門、塑料閥門、波紋管閥門、蒸汽閥門

產品簡介在線詢價

進口一片式球閥｜進口球閥

德國托普進口一片式球閥優點：
適用于經常操作，啟閉迅速、輕便。
1.流體阻力小。
2.結構簡單，相對體積小，重量輕，便于維修。
3.密封性能好
4.不受安裝方向的限制，介質的流向可任意。
5.振動，噪聲小。
進口球閥的質量不僅*于使用壽命*，更為耐磨而設計，AIR閥門為您提供優質的產品和多方面的服務。

進口一片式球閥產品概述：
進口一片式球閥Z大優點

進口一片式球閥｜進口球閥超薄型對夾球閥產品信息

進口一片式球閥｜進口球閥

德國托普進口一片式球閥優點：

適用于經常操作，啟閉迅速、輕便。

1.流體阻力小。

2.結構簡單，相對體積小，重量輕，便于維修。

3.密封性能好

4.不受安裝方向的限制，介質的流向可任意。

5.振動，噪聲小。

進口球閥的質量不僅*于使用壽命*，更為耐磨而設計，AIR閥門為您提供優質的產品和多方面的服務。

進口一片式球閥產品概述：

進口一片式球閥zui大優點就是有效介質從閥體處外漏。進口二片式球閥和進口三片式球閥都是用螺栓將分開的閥體連接成一體，閥體間有密封墊片進行密封。溫度高時或安裝不當會存在外漏可能。一片式球閥由于閥體為整體式，外漏點就只有閥桿處密封一處，可靠性要高些。
法蘭保溫球閥就采用一片式球閥結構，保溫夾套把閥體部分包裹在內，介質不會泄漏到保溫夾套中，反之，保溫夾套中的加熱蒸汽或?qū)嵊鸵膊粫M(jìn)入到管路介質中。確保了安全。
一片式螺紋球閥由于閥桿密封處比較薄弱，通常適用壓力不高的介質。壓力較高時應選用二片式螺紋球閥或三片式螺紋球閥。

進口一片式球閥開啟過程：

進口一片式球閥和法蘭閘閥是同屬一個類型的閥門，區別在它的關閉件是個球體，球體繞閥體中心線作旋轉來達到開啟、關閉的一種閥門。球閥在管路中主要用來做切斷、分配和改變介質的流動方向。廣式球閥是近幾年來被廣泛采用的一種新型閥門，在關閉位置，球體受閥桿的機械施壓作用，緊壓在閥座上。當逆時針轉動手輪時，閥桿則反向運動，其底部角形平面使球體脫開閥座。閥桿繼續提升，并與閥桿螺旋槽內的導銷相互作用，使球體開始無摩擦地旋轉。直至到全開位置，閥桿提升到極限位置，球體旋轉到全開位置。
進口一片式球閥的關閉過程
關閉時，順時針旋轉手柄，閥桿開始下降并使球體離開閥座開始旋轉。繼續旋轉手輪，閥桿受到嵌于其上螺旋槽內的導銷的作用，使閥桿和球體同時旋轉90°?？煲P(guān)閉時，球體已在與閥座無接觸的情況下旋轉了90°。手輪轉動的zui后幾圈，閥桿底部的角形平面機械地楔向壓迫球體，使其緊密地壓在閥座上，達到*密封。

Imported ball valve

Germany top import valve advantages:

Suitable for regular operation, open and close quickly and easily.

1 small fluid resistance.

2 the utility model has the advantages of simple structure, relatively small size, light weight and convenient maintenance.

3 good sealing performance

4 is not limited by the installation direction, the flow of media can be arbitrary.

5 vibration, small noise.

The quality of the ball valve is not limited to the use of a long life, more wear-resistant design, AIR valve to provide you with quality products and services.

Import a ball valve product overview:

The biggest advantage of imports of a piece of ball valve is the effective medium leakage from the valve body. Imported two piece ball valve and imported ball valve are used to separate the three pieces of the valve body into one body, there is a seal gasket seal between the valve body. If the temperature is high or improper installation, there will be leakage. A ball valve as the valve body is an integral type, only the stem seal leakage point at a higher reliability.

Flange insulation ball valve with a ball valve structure, insulation jacket wrapped the inner part of the valve body, the medium does not leak to the insulation jacket, on the other hand, the insulation jacket of heating steam or hot oil can not enter into the pipeline medium. Ensure safety.

A piece of threaded ball valve stem seal is relatively weak, usually the pressure is not high medium. High pressure should be used when two pieces of thread ball valve or three piece ball valve.

Import a ball valve opening process:

The import of a piece of ball valve and flange gate valve is the same type of valve, the difference in its closure is a sphere, the ball around the center line of the body to rotate to achieve the opening and closing of a valve. Ball valve in the pipeline is mainly used for cutting, distribution and change the direction of the flow of media. Wide ball valve is widely used in recent years, a new type of valve in the closed position, the ball by the mechanical pressure of the stem, the pressure on the seat. When the handwheel counterclockwise, the stem is the reverse movement, the bottom of the angular plane to disengage the ball seat. The valve stem continues to lift and interacts with the guide pin in the stem spiral groove so that the ball begins to rotate without friction. Until the full open position, the valve stem to the limit position, the ball rotation to full open position.

The closing process of imported ball valve

When the valve is closed, the handle is rotated clockwise, the valve stem begins to fall and the ball starts to rotate from the valve seat. Continue to rotate the handwheel, the valve stem is embedded in the spiral groove on the role of the guide pin, so that the stem and the ball simultaneously rotate 90 degrees. Close, the ball has no contact with the valve seat in the case of rotation of 90 degrees. At the bottom of the handwheel, the angle of the bottom of the valve stem is mechanically wedged into the compression sphere, so that it is tightly pressed on the valve seat to achieve complete sealing.