進口鑄鋼氣動隔膜泵｜美國鑄鋼氣動隔膜閥
進口鑄鋼氣動隔膜泵概述：
即能抽送流動的液體，又能輸送一些不易流動的介質，具有自吸泵、潛水泵、屏蔽泵、泥漿泵和雜質泵等輸送機械的許多優點。
The flow of liquid can be pumped, and easy to transport some of the flow medium, has many advantages such as self suction pump, submersible pump, shield pump, pump mud and impurities such as transportation machinery.
進口鑄鋼氣動隔膜泵特點：
1、不需灌引水，吸程高達7m，揚程達50m，出口壓力≥6kgf/cm2;
2、流動寬敞，通過性能好，允許通過zui大顆粒直徑達10mm。抽送泥漿、雜質時，對泵磨損甚微;
3、揚程、流量可通過氣閥開度實現無級調節（氣壓調節在1-7kgf/cm2之間）;
4、該泵無旋轉部件，沒有軸封，隔膜將抽送的介質與泵的運動部件、工作介質*隔開，所輸送的介質不會向外泄漏。所以抽送有毒、易發揮或腐蝕性介質時，不會造成環境污染和危害人身安全;
5、不*電，在易燃、易爆場所使用安全可靠;
6、可以浸沒在介質中工作;
進口鑄鋼氣動隔膜泵技術參數：
流量：0-30m3/h； 揚程：0-50m； 口徑：10-100mm；
溫度：-15-+120℃； 壓力：0.1-0.7MPa； 自吸高度：5-7m。
進口鑄鋼氣動隔膜泵工作原理：
當壓縮氣體進入配氣閥，配氣閥會將壓縮氣體壓入泵其中一腔從而推動隔膜片運動擠壓液體流出，然而泵的另一腔泵因?yàn)楸焕龆胍后w。當隔膜片到達終點，配氣閥機構自動將壓縮空氣引入泵腔另一端，推動隔膜片朝相反方向運動，從而使兩個兩個隔膜片在泵體的兩個腔做往復運動抽動液體流動。
進口鑄鋼氣動隔膜泵應用領域：
1、氣動隔膜泵可以吸花生醬、泡菜、土豆泥、小紅腸、果醬蘋果漿、巧克力等。
2、塑料氣動隔膜泵可以用于吸油漆、樹膠、顏料。
3、粘合劑和膠水、全部種類可用泵吸取。
4、各種瓦、瓷、磚器及陶器釉漿。
5、油井鉆好后，用氣動隔膜泵吸沉積物及灌漿。
6、吸各種乳劑和填料。
進口鑄鋼氣動隔膜泵美國泰樂TYLER售后服務：
用戶第1，信譽第1，優質、完善的售后服務是我們產品價值的延伸和對客戶利益的重要保證，我公司服務質量管理體系的宗旨是：建立并不斷完善科學、合理、高效的服務質量管理體系，公正、準確、及時地完成客戶的售后服務質量保障工作，為我公司的客戶服務建立良好、全面、充分的服務體系。
Imported cast steel pneumatic diaphragm pump
Introduction of imported cast steel pneumatic diaphragm pump:
The flow of liquid can be pumped, and easy to transport some of the flow medium, has many advantages such as self suction pump, submersible pump, shield pump, pump mud and impurities such as transportation machinery.
The flow of liquid can be pumped, and easy to transport some of the flow medium, has many advantages such as self suction pump, submersible pump, shield pump, pump mud and impurities such as transportation machinery.
Characteristics of imported cast steel pneumatic diaphragm pump:
1, without irrigation water, suction lift up to 7m, the head of 50m, the outlet pressure is greater than or equal to 6kgf/cm2;
2, flow spacious, through good performance, allowing the maximum particle diameter of up to 10mm. Pumping mud and impurities, little wear on the pump;
3, head, flow through the valve open to realize stepless adjustment (pressure adjustment between the 1-7kgf/cm2);
4, the pump has no rotary parts, no seals, moving parts, working medium diaphragm pumping medium and pump compley separated, the transmission medium does not leak out. Pumping so toxic and flammable or corrosive media, it will not cause environmental pollution and harm personal safety;
5, do not have electricity, in inflammable and explosive places safe and reliable;
6, can be immersed in medium;
Technical parameters of imported cast steel pneumatic diaphragm pump:
Flow rate: 0-30m3/h; head: 0-50m; diameter: 10-100mm;
Temperature: -15-+120 DEG C; pressure: 0.1-0.7MPa; self suction height: 5-7m.
The working principle of imported cast steel pneumatic diaphragm pump:
When the compressed gas enters the valve, the valve will be compressed gas into the cavity of the pump pressure to drive the diaphragm to move the squeeze out of the liquid, but the other pump cavity pump was pulled out of the liquid. When the diaphragm reaches the end point, valve mechanism automatically compressed air into the pump cavity and the other end, push the diaphragm in the opposite direction, thus making the two two diaphragm reciprocating motion in the two chamber of the pump body with liquid flow.
Application of imported cast steel pneumatic diaphragm pump:
1, pneumatic diaphragm pump can suck peanut butter, pickles, mashed potatoes, red sausage, jam apple syrup, chocolate, etc..
2, plastic pneumatic diaphragm pumps can be used for absorbing paint, gum and pigment.
3, adhesive and glue, all kinds of pumps can be used.
4, all kinds of tile, porcelain, brick and pottery glaze.
5, the oil well drilling, the use of pneumatic diaphragm pump sediment and grouting.
6, absorb all kinds of emulsion and filler.
The United States imported steel pneumatic diaphragm pump Taylor TYLER customer service service:
First users, first credit, quality, perfect customer service service is an important guarantee for extending our products and value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.
會員1.png)
QQ:2568841715
